Ocape
140-230 mm Adjustable Decking support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 140 to 230 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Res..
140-230 mm Adjustable Tile support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 140 to 230 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Res..
2.5% SLOPE CORRECTOR
Fixed slope corrector 2.5%This is an additional support that is located under the base of the support to compensate for surface tilt correction up to 2.5%.Can be used simultaneously 4 regulators, i.e. 10% of the leveled slope of the installation surface. Installation GuidelinesInstall the regulator directly UNDER the support base without glue or screws.Not compatible with the following supports: HD10, HD 8/20, HD 20/30, as well as with HL10, HL 20/30...
20-30 mm Adjustable Decking support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 20 to 30 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..
20-30 mm Adjustable Tile support Ocape (by JouPlast)
Adjustable support for the Tile mounting with a height of 20 to 30 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles.Unique support design with integrated fixing for installing ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resistance to ultraviolet radiationResistance to exter..
40-60 mm Adjustable Decking support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 40 to 60 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..
40-60 mm Adjustable Tile support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 40 to 60 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..
50-80 mm Adjustable Decking support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 50 to 80 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..
50-80 mm Adjustable Tile support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 50 to 80 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..
60 MM HEIGHT EXTENDER
HEIGHT extension 60 mm This accessory increases the height of the supports by 60 mm.Simultaneous use is possible 4 extension cords, i.e. 240 mm. Increasing the height.Installation recommendationsInstall the adjuster directly between the base of the support and the top without glue or screws.It is possible to use 4 extension cords simultaneously..
80-140 mm Adjustable Decking support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 80 to 140 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resi..
80-140 mm Adjustable Tile support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 80 to 140 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resi..
JouPlast Ocape
PROFESSIONAL SOLUTIONS
OCAPE® is only available for professionals with of terrace construction and designed to meet all your needs:
- easy installation even on large roofs (residential buildings, industrial and commercial buildings)
- adjustments and dimensions to cover the full range of heights and simplifying the leveling of terraces
- solutions for any type of decorative decoration
Ocape: Adjustable supports for residential terraces with porcelain stoneware or wood or composite board
A range of adjustable and fixed supports are ideal for creating ceramic tile terraces as well as wood/composite terraces. We offer a full range of self-levelling supports for flat or uneven surfaces.
Ocape adjustable raised floor supports have an adjustment range from 18 to 955 mm, while being easy and reliable to install and adjust.
The increased area of the upper bearing surface of the pedestal is specially designed and optimized for laying very thick ceramic tiles.
Made in France
All our ranges are designed and manufactured in the Ahn department in France.
We are committed to contributing to the economic development of our region and produce our products from environmentally friendly 100% recycled materials.
Customer Service Hotline
Our team is here to support and advise you on all your trading related issues, from technical product details to best practices, type-specific compliance, and more.
Full compliance
OCAPE products are designed to meet the high demands of waterproof flat roof professionals.
They fully comply with French standards and are certified by a technical inspection agency.