Ocape

Adjustable support for mounting terraces with a height of 140 to 230 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Res..

Adjustable support for mounting terraces with a height of 140 to 230 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Res..

Fixed slope corrector 2.5%This is an additional support that is located under the base of the support to compensate for surface tilt correction up to 2.5%.Can be used simultaneously  4 regulators, i.e. 10% of the leveled slope of the installation surface. Installation GuidelinesInstall the regulator directly UNDER the support base without glue or screws.Not compatible  with the following supports: HD10, HD 8/20, HD 20/30, as well as with HL10, HL 20/30...

Adjustable support for mounting terraces with a height of 20 to 30 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..

Adjustable support for the Tile mounting with a height of 20 to 30 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles.Unique support design with integrated fixing for installing ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resistance to ultraviolet radiationResistance to exter..

Adjustable support for mounting terraces with a height of 40 to 60 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..

Adjustable support for mounting terraces with a height of 40 to 60 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..

Adjustable support for mounting terraces with a height of 50 to 80 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..

Adjustable support for mounting terraces with a height of 50 to 80 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..

HEIGHT extension 60 mm This accessory increases the height of the supports by 60 mm.Simultaneous use is possible  4 extension cords, i.e. 240 mm. Increasing the height.Installation recommendationsInstall the adjuster directly between the base of the support and the top without glue or screws.It is possible to use 4 extension cords simultaneously..

Adjustable support for mounting terraces with a height of 80 to 140 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resi..

Adjustable support for mounting terraces with a height of 80 to 140 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resi..