Supports (page 2)

PB-9 Adjustable support without tilt corrector. Height adjustment range: 560-715 mm. Height with tilt corrector U-PH5: 574-729 mm. [Set: RV-4 + 2 x RV-C2] ..

Tilt Corrector  [lower] for PB series 0 to 5% Increases the height of the support by + 14 mm. 0.5% tilt step..

Adjustable support for mounting terraces with a height of 140 to 230 mm.This OCAPE® adjustable support model is ideal for creating wooden or composite terraces.Unique support design with integrated fixing for installing decking joist.You don't need to order a fixer for a ljoist separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resistance to ultraviolet radiationResistance to external weat..

Adjustable support for mounting terraces with a height of 140 to 230 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Res..

Adjustable support for mounting terraces with a height of 140 to 230 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles.Unique support design with integrated fixing for installing ceramic tile fixing.You don't need to order a fixer for a tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resistance to ultraviolet radiationResistance to external w..

Adjustable support for mounting terraces with a height of 140 to 230 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Res..

Adjustable support for porcelain stoneware height from 155 to 245 mm with integrated auto-slope corrector up to 5%.  This Jouplast® adjustable support model is ideal for creating ceramic tile terraces on uneven bases. The height of the support is adjustable in the range from 55 to 75 mm. Integrated automatic slope correction allows you to use the support on a flat or uneven surface and compensate for a slope of up to 5%, regardless of the characteristics of the base. The upper part of the support also has a built-in clamp for installing ceramic tiles. You do not need to order a slope corrector and tile fixer separately - you do not overpay for excess material and installation is significantly faster. Special clamps for i..

Fixed slope corrector 2.5%This is an additional support that is located under the base of the support to compensate for surface tilt correction up to 2.5%.Can be used simultaneously  4 regulators, i.e. 10% of the leveled slope of the installation surface. Installation GuidelinesInstall the regulator directly UNDER the support base without glue or screws.Not compatible  with the following supports: HD10, HD 8/20, HD 20/30, as well as with HL10, HL 20/30...

Adjustable support for mounting terraces with a height of 20 to 30 mm.This Jouplast®adjustable support model is ideal for creating terraces with ceramic tiles.Unique support design with integrated fixing for installing ceramic tile fixing.You don't need to order a fixer for a tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resistance to ultraviolet radiationResistance to external w..

Adjustable support for mounting terraces with a height of 20 to 30 mm.This OCAPE® adjustable support model is ideal for creating wooden or composite terraces.Unique support design with integrated fixing for installing ceramic tile fixing.You don't need to order a fixer for a tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resistance to ultraviolet radiationResistance to external we..

Adjustable support for mounting terraces with a height of 20 to 30 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..

Adjustable support for the Tile mounting with a height of 20 to 30 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles.Unique support design with integrated fixing for installing ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resistance to ultraviolet radiationResistance to exter..

Adjustable support for porcelain stoneware height from 29 to 39 mm with integrated auto-slope corrector up to 5%.  This Jouplast® adjustable support model is ideal for creating ceramic tile terraces on uneven bases. The height of the support is adjustable in the range from 55 to 75 mm. Integrated automatic slope correction allows you to use the support on a flat or uneven surface and compensate for a slope of up to 5%, regardless of the characteristics of the base. The upper part of the support also has a built-in clamp for installing ceramic tiles. You do not need to order a slope corrector and tile fixer separately - you do not overpay for excess material and installation is significantly faster. Special clamps for ins..

Adjustable support for mounting terraces with a height of 40 to 60 mm.This OCAPE® adjustable support model is ideal for creating wooden or composite terraces.Unique support design with integrated fixing for installing ceramic tile fixing.You don't need to order a fixer for a tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resistance to ultraviolet radiationResistance to external we..

Adjustable support for mounting terraces with a height of 40 to 60 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..