OCAPE® Adjustable Supports for Tiles and Porcelain Stoneware – France

Advantages of OCAPE® Adjustable Supports for Your Project

Why Choose OCAPE® for Tile and Porcelain Stoneware Installation?

OCAPE® Adjustable Supports for Tiles and Porcelain Stoneware – France

Grid View:

140-230 mm Adjustable Tile support Jouplast

Adjustable support for mounting terraces with a height of 140 to 230 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles.Unique support design with integrated fixing for installing ceramic tile fixing.You don't need to order a fixer for a tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resistance to ultraviolet radiationResistance to external w..

155-245 мм Регулируемая опора с автоматом корректора уклона

Adjustable support for porcelain stoneware height from 155 to 245 mm with integrated auto-slope corrector up to 5%.  This Jouplast® adjustable support model is ideal for creating ceramic tile terraces on uneven bases. The height of the support is adjustable in the range from 55 to 75 mm. Integrated automatic slope correction allows you to use the support on a flat or uneven surface and compensate for a slope of up to 5%, regardless of the characteristics of the base. The upper part of the support also has a built-in clamp for installing ceramic tiles. You do not need to order a slope corrector and tile fixer separately - you do not overpay for excess material and installation is significantly faster. Special clamps for i..

2.5% SLOPE CORRECTOR

Fixed slope corrector 2.5%This is an additional support that is located under the base of the support to compensate for surface tilt correction up to 2.5%.Can be used simultaneously  4 regulators, i.e. 10% of the leveled slope of the installation surface. Installation GuidelinesInstall the regulator directly UNDER the support base without glue or screws.Not compatible  with the following supports: HD10, HD 8/20, HD 20/30, as well as with HL10, HL 20/30...

20-30 mm Adjustable Decking support JouPlast

Adjustable support for mounting terraces with a height of 20 to 30 mm.This Jouplast®adjustable support model is ideal for creating terraces with ceramic tiles.Unique support design with integrated fixing for installing ceramic tile fixing.You don't need to order a fixer for a tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resistance to ultraviolet radiationResistance to external w..

29-39 мм Регулируемая опора с автоматом корректора уклона

Adjustable support for porcelain stoneware height from 29 to 39 mm with integrated auto-slope corrector up to 5%.  This Jouplast® adjustable support model is ideal for creating ceramic tile terraces on uneven bases. The height of the support is adjustable in the range from 55 to 75 mm. Integrated automatic slope correction allows you to use the support on a flat or uneven surface and compensate for a slope of up to 5%, regardless of the characteristics of the base. The upper part of the support also has a built-in clamp for installing ceramic tiles. You do not need to order a slope corrector and tile fixer separately - you do not overpay for excess material and installation is significantly faster. Special clamps for ins..

40-60 mm Adjustable Tile support Jouplast

Adjustable support for mounting terraces with a height of 40 to 60 mm.This Jouplast® adjustable support model is ideal for creating terraces with ceramic tiles.Unique support design with integrated fixing for installing ceramic tile fixing.You don't need to order a fixer for a tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resistance to ultraviolet radiationResistance to external ..

50-80 mm Adjustable Tile support Jouplast

Adjustable support for mounting terraces with a height of 50 to 80 mm.This Jouplast® adjustable support model is ideal for creating terraces with ceramic tiles.Unique support design with integrated fixing for installing ceramic tile fixing.You don't need to order a fixer for a tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resistance to ultraviolet radiationResistance to external ..

55-75 мм Регулируемая опора с автоматом корректора уклона

Adjustable support for porcelain stoneware height from 55 to 75 mm with integrated auto-slope corrector up to 5%.  This Jouplast® adjustable support model is ideal for creating ceramic tile terraces on uneven bases. The height of the support is adjustable in the range from 55 to 75 mm. Integrated automatic slope correction allows you to use the support on a flat or uneven surface and compensate for a slope of up to 5%, regardless of the characteristics of the base. The upper part of the support also has a built-in clamp for installing ceramic tiles. You do not need to order a slope corrector and tile fixer separately - you do not overpay for excess material and installation is significantly faster. Special clamps for ins..

60 MM HEIGHT EXTENDER

HEIGHT extension 60 mm This accessory increases the height of the supports by 60 mm.Simultaneous use is possible  4 extension cords, i.e. 240 mm. Increasing the height.Installation recommendationsInstall the adjuster directly between the base of the support and the top without glue or screws.It is possible to use 4 extension cords simultaneously..

65-95 мм Регулируемая опора с автоматом корректора уклона

Adjustable support for porcelain stoneware height from 65 to 95 mm with integrated auto-slope corrector up to 5%.  This Jouplast® adjustable support model is ideal for creating ceramic tile terraces on uneven bases. The height of the support is adjustable in the range from 55 to 75 mm. Integrated automatic slope correction allows you to use the support on a flat or uneven surface and compensate for a slope of up to 5%, regardless of the characteristics of the base. The upper part of the support also has a built-in clamp for installing ceramic tiles. You do not need to order a slope corrector and tile fixer separately - you do not overpay for excess material and installation is significantly faster. Special clamps for ins..

80-140 mm Adjustable Tile support Ocape (by JouPlast)

Adjustable support for mounting terraces with a height of 80 to 140 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles.Unique support design with integrated fixing for installing ceramic tile fixing.You don't need to order a fixer for a tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resistance to ultraviolet radiationResistance to external we..

95-155 мм Регулируемая опора с автоматом корректора уклона

Adjustable support for porcelain stoneware height from 95 to 155 mm with integrated auto-slope corrector up to 5%.  This Jouplast® adjustable support model is ideal for creating ceramic tile terraces on uneven bases. The height of the support is adjustable in the range from 55 to 75 mm. Integrated automatic slope correction allows you to use the support on a flat or uneven surface and compensate for a slope of up to 5%, regardless of the characteristics of the base. The upper part of the support also has a built-in clamp for installing ceramic tiles. You do not need to order a slope corrector and tile fixer separately - you do not overpay for excess material and installation is significantly faster. Special clamps for in..

Showing 1 to 12 of 12 (1 Pages)

JouPlast: Adjustable Supports for Terraces

JouPlast offers a wide range of adjustable and fixed supports for terraces with ceramic tiles, porcelain stoneware, and other coverings. Our supports provide stability and durability for constructions, even on uneven surfaces.

Advantages of Our Adjustable Supports

  • Precise height adjustment using a nut, allowing supports to adapt to any conditions.
  • UV resistance and chemical resistance for long-term use.
  • Strong materials with a high load capacity, up to 1 ton per support.
  • Special design for laying thick ceramic tiles and protecting waterproofing.
  • The contact area of the support base with the surface is more than 300 cm², ensuring reliable fixation.

Why Choose Us?

We are a reliable partner with more than 10 years of experience in the market. Our terrace supports offer high quality and innovative solutions that meet the needs of both professionals and private clients.

  • Experience: Over 10 years in the market, providing high-quality building materials.
  • Stock Availability: We maintain a wide range of products in stock, allowing us to quickly meet customer needs.
  • Technical Support: Our specialists are always ready to provide advice on choosing and installing supports, as well as help with calculating the required materials.
  • Quality Guarantee: We work only with trusted manufacturers, ensuring reliability and durability of the products.

Our Solutions for Terraces and Paving

Our adjustable supports are perfect for laying terraces made of various materials, including porcelain stoneware, tiles, and wooden composites. We offer solutions for both private and commercial projects, ensuring durability and ease of installation.

Why Choose JouPlast?

We offer innovative and environmentally friendly solutions for terrace construction. All our products are developed and manufactured in France using 100% recycled materials, contributing to environmental preservation.