For decking board
140-230 mm Adjustable Decking support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 140 to 230 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Res..
2.5% SLOPE CORRECTOR
Fixed slope corrector 2.5%This is an additional support that is located under the base of the support to compensate for surface tilt correction up to 2.5%.Can be used simultaneously 4 regulators, i.e. 10% of the leveled slope of the installation surface. Installation GuidelinesInstall the regulator directly UNDER the support base without glue or screws.Not compatible with the following supports: HD10, HD 8/20, HD 20/30, as well as with HL10, HL 20/30...
20-30 mm Adjustable Decking support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 20 to 30 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..
40-60 mm Adjustable Decking support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 40 to 60 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..
50-80 mm Adjustable Decking support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 50 to 80 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..
60 MM HEIGHT EXTENDER
HEIGHT extension 60 mm This accessory increases the height of the supports by 60 mm.Simultaneous use is possible 4 extension cords, i.e. 240 mm. Increasing the height.Installation recommendationsInstall the adjuster directly between the base of the support and the top without glue or screws.It is possible to use 4 extension cords simultaneously..
80-140 mm Adjustable Decking support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 80 to 140 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resi..
Adjustable Ocape Supports for Installing Wooden or Composite Decking Boards
Ocape: Adjustable supports for installing wooden or composite decking boards. These supports ensure reliability and ease during the installation of terraces, creating aesthetic and durable outdoor spaces.
The range of adjustable and fixed supports is ideal for various types of coverings, including wooden and composite decking boards. They are suitable for all surfaces — from flat to uneven, making them a versatile solution for different construction projects.
Adjustable supports Ocape have a height adjustment range from 18 to 955 mm, ensuring simplicity and reliability during installation. The specially designed upper load-bearing surface is optimized for terraces with increased loads, guaranteeing the durability of structures.
Key Advantages:
- Millimeter height adjustment using the adjustment nut.
- Self-locking grooves to enhance ground support, increasing the stability of the structure.
- Rounded edge of the support base to prevent damage to waterproofing.
- Perforation on the flange for effective water drainage and moisture prevention.
- Load resistance of over 1 ton, ensuring strength and reliability.
- UV and chemical resistance for durability in outdoor environments.
- Contact area of the support base with the surface exceeds 300 cm² for stable support.
- Contact area of the upper part of the support exceeds 100 cm² for even load distribution.
Why Choose Us:
ISE Group is the official supplier of Ocape products in Ukraine. We have many years of experience in supplying high-quality building materials and guarantee product availability in stock with fast delivery across Ukraine.
Our clients receive not only quality products but also professional technical support at all stages — from product selection to installation. We provide consultations, assist with calculations, and offer after-sales service.
By choosing ISE Group as your supplier, you gain a reliable partner who ensures timely delivery, high-quality materials, and professional support at every stage of work.