+38 (096) 744-60-61
Ocape For tiles and ceramic granite
140-230 mm Adjustable Tile support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 140 to 230 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Res..
2.5% SLOPE CORRECTOR
Fixed slope corrector 2.5%This is an additional support that is located under the base of the support to compensate for surface tilt correction up to 2.5%.Can be used simultaneously 4 regulators, i.e. 10% of the leveled slope of the installation surface. Installation GuidelinesInstall the regulator directly UNDER the support base without glue or screws.Not compatible with the following supports: HD10, HD 8/20, HD 20/30, as well as with HL10, HL 20/30...
20-30 mm Adjustable Tile support Ocape (by JouPlast)
Adjustable support for the Tile mounting with a height of 20 to 30 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles.Unique support design with integrated fixing for installing ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resistance to ultraviolet radiationResistance to exter..
40-60 mm Adjustable Tile support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 40 to 60 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..
50-80 mm Adjustable Tile support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 50 to 80 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resis..
60 MM HEIGHT EXTENDER
HEIGHT extension 60 mm This accessory increases the height of the supports by 60 mm.Simultaneous use is possible 4 extension cords, i.e. 240 mm. Increasing the height.Installation recommendationsInstall the adjuster directly between the base of the support and the top without glue or screws.It is possible to use 4 extension cords simultaneously..
80-140 mm Adjustable Tile support Ocape (by JouPlast)
Adjustable support for mounting terraces with a height of 80 to 140 mm.This OCAPE® adjustable support model is ideal for creating terraces with ceramic tiles or wooden or composite terraces.Unique support design with integrated fixing for installing decking joist or ceramic tile fixing.You don't need to order a fixer for a log or tile separately - you don't overpay for extra material and the installation is much faster.Extreme reliability - the support can withstand a load of up to 1,000 kg.The diameter of the lower part of the support is 208 mm, which is more than 300 cm2 of contact areaThe diameter of the upper part of the support is 120 mm, which is more than 100 cm2 of contact areaTemperature range: from -40 to + 60 degrees Celsius.Resi..
Ocape: Adjustable Supports for Granite Terrace Installation
OCAPE adjustable supports are designed for creating terraces made of granite, tiles, and other materials. They are perfect for use on both flat and uneven surfaces, ensuring fast and reliable installation without the need for special tools.
Our range includes self-leveling supports that ensure perfect flatness even on complex surfaces. They have an adjustable range from 18 to 955 mm, allowing you to set the height of the structure to meet any requirements.
OCAPE offers an increased upper bearing surface area, making these supports ideal for laying thick ceramic tiles and other heavy materials. This guarantees the durability and stability of the structures even under high loads.
Key Advantages:
- Millimeter adjustment using an adjustment nut for precise height setting.
- Self-locking grooves for enhancing ground grip, providing additional stability to the structure.
- Rounded edge of the base to prevent damage to waterproofing.
- Perforation on the flange for better water drainage and preventing water accumulation.
- High resistance to UV radiation and chemical exposure, ensuring the longevity of the materials.
- Load resistance of over 1 ton, guaranteeing the reliability and safety of the structures.
- Large contact area with the surface for even load distribution and improved stability.
Why Choose Us?
ISE Group is the direct supplier and official representative of OCAPE in Ukraine. We have extensive experience in supplying and installing terrace supports, allowing us to guarantee the high quality and reliability of our products.
We offer:
- A wide range of products that meet the highest quality standards.
- Availability of products in stock for fast delivery.
- Professional technical support and consultations at all stages of the project.
- Warranty on all products and services provided.
By choosing us as your supplier, you get a reliable partner with extensive experience and guaranteed product quality for your project.